Alan Grove SB Chevy Alternator Bracket( $69.99 )

Accel Super Coil( $49.99 )

Flomaster 40 Series Delta Force Alcohol Srint Car Race Muffler( $79.99 )

Delta Flow technology just for the track.
Looking for a race-winning muffler with the distinctive two-chamber sound? Look no further. Flowmaster's patented Delta Flow technology was used to create the Delta Force Race line mufflers. These Delta Force 40 Series mufflers provide excellent flow and scavenging, for added torque and horsepower in race applications. This revolutionary technology has allowed Flowmaster to shrink case sizes for improved ground clearance. Flowmaster builds this series of mufflers by hand to ensure that they are the very best, in the most demanding environments.

Delta Force 40 Series, 3 1/2" Inlet, 3 1/2" Outlet, Steel, Aluminized, 5" Case.

Centerforce Dual Friction Clutch-Pressure Plate-Flywheel Kit( $998.99 )

Centerforce Dual Friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance. Centerforce Dual Friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.

Fits 1999-2003 Ford F250-F550 with 7.3L diesel engine.  This kit includes a steel flywheel, clutch disc and pressure plate.

Flomaster Scavenger Series Collector Muffler( $159.99 )

Significantly increase your horsepower and torque.
Flowmaster's Scavenger collectors are designed to be used as retrofits for existing headers or for a custom fabricated set. These collectors can increase torque and horsepower significantly in certain applications. 3 1/2" IN, 3" OUT, 5" x 6" Case

Harwood Stock Style Pin On Hood( $229.99 )

Whether you want to draw more air into your engine, lose some front-end weight, or you just want a cool looking hood, Harwood fiberglass lift-off hoods are the way to go. This lift-off hood is Harwood's lightest offerings, and require the use of aftermarket mounting fasteners and hardware. This hood isn't designed to work with factory hinges or latches.  Fits `66-`67 Chevy II/Nova.

Flex-A-Lite Monster Direct Fit Fan( $479.99 )

This is as big as it gets! Flex-a-lite's rugged new Monster direct-fit electric fans were designed specifically for the cooling demands of big trucks. Vehicles equipped with these fans have recorded gains as high as 17 HP and 20 ft.-lbs., with a 2-3 mpg improvement. Other features and benefits include dual 15 in. diameter fans, a glass-reinforced nylon shroud, a variable speed control, quicker warms-ups and cool-downs, quieter operation, and a whopping 5,500 cfm maximum airflow rating. All necessary mounting hardware is included for installation.

This fan fits:

 Chevy / GMC:
1992-1999 Chevrolet/GMC C/K, Silverado, Trucks with 34" long radiators (5.0L-V8, 5.7L-V8, 6.5L-V8, 7.4L-V8)

1992-1999 Chevrolet/GMC Suburban ( 5.7L-V8, 6.2L-V8, 6.5L-V9, 7.4L-V8)

1995-1999 Chevrolet Tahoe (5.7L-V8, 6.5L-V8, 7.4L-V8)

1992-1994 Chevrolet Blazer (5.7L-V8, 6.5L-V8)

1992-1999 GMC Yukon (5.7L-V8, 6.5L-V8, 7.4L-V8)

True Flow Air Intake System( $209.99 )

The True Flow system replace restrictive factory tubes with mandrel bent tubing while retaining the factory inlet and air box and also replaces the filter with a foam air filter, which result in improved performance and towing capacity, but also increase fuel efficiency.

Gains of up to 19 horsepower and 37 lbs of torque.

Fits 1999-2004 Chevy and GMC 4.8L, 5.3L, 6.0L

NOS Pro Shot Twin Fogger2 Nitrous Oxide System( $1459.99 )

NOS Pro Shot Twin Fogger2 nitrous oxide systems are responsible for many racing records and championships. They are engineered for ultimate professional mountain motors, and are the most powerful nitrous systems in the world, capable of generating huge power increases of 150 to 1000 horsepower. They use a single nitrous bottle with two complete Pro Shot Fogger systems, which are built around NOS' patented high-flow Fogger2 nozzles. These provide great atomization and nitrous/fuel distribution, and are highly tunable to get just the right setup for your vehicle. Systems come complete with the 15# bottle and mounting brackets, Super High Flow valve with built-in nitrous gauge, nozzles, jets, solenoids, switches, wiring, stainless-braided -6 supply hose, fittings, tubing for rigid supply lines, and all mounting hardware. Racing fuel, racing ignition system with timing control, and internal engine modifications are required.

Edelbrock NASCAR RPM Performer( $319.99 )

Stand out from all the crowds with unique looks and superior performance.
Nothing is more American than NASCAR stock car racing and Edelbrock manifolds. Now you can get an exclusive Edelbrock NASCAR Edition RPM Air-Gap manifold. Based on the popular RPM Air-Gap designs, these manifolds will deliver superior and reliable performance, along with unique looks. Edelbrock NASCAR Edition RPM Air-Gap manifolds will set you apart from the crowd with their durable and distinctive black powdercoated finish and attractive full-color emblem. They even include an Edelbrock/NASCAR special edition embroidered hat that will make you the envy of all your racing friends!  Fits small block Chevy `55-`86.  RPM range 1500-6500.

Professional Products Cyclone Polished Intake Manifold( $149.99 )

The 52000 Power Plus Cyclone Manifold is a direct replacement for the stock manifold on 1957-1995 Small Block Chevy non-EGR engines.  Includes special adapter bushings to fit 1987-1995 engines. Use the stock Quadra-Jet carb or 500-650 cfm vacuum secondary carburetor. Kit includes adapter plate to permit use of certain square bore style carburetors. Power+Plus Manifolds are cast from steel molds, not from sand molds. Permanent molds provide a tighter grain casting thereby reducing the occurrence of porosity which can mar the polished finish. Additionally, each Power+Plus Manifold is 100% pressure tested for leaks to eliminate installation problems. This is our most popular manifold and is showing up on many performance street machines and street rods.

Crane Energizer Cam & LIfter Kit( $159.99 )

Crane Energizer cam and lifter kits give you more midrange power, added torque, and better throttle response at a price anyone can afford. The hydraulic camshafts are computer-developed for non-emissions controlled vehicles with tighter lobe separations and single patterns. The kits include a camshaft, lifters, and assembly lube.

Cam and Lifters, Hydraulic Flat Tappet, Advertised Duration 284/284, Lift .554/.554, Ford, 351CM/400, Kit

FAIR IDLE, MODERATE PERFORMANCE USAGE, GOOD MID-RANGE HP, MILD BRACKET RACING, AUTO TRANS W/2500+ CONVERTER, 3400-3800 CRUISE RPM, 9.5 TO 11.0 COMPRESSION RATIO ADVISED. BASIC RPM 3000-6000

Dodge Ram Steel Roll Pan( $169.99 )

APC Products 1994-2001 Dodge Ram steel roll pan

Bully Dog Power Chip( $199.99 )

Fits `93-`94 Ford 7.3L switchable chip.  30-50-75 horsepower improvement on the fly.

Bully Dog Power Hound Chip( $299.99 )

Power Hound chip for `03-`04 Ford 6.0L.  Adjustable from 60 to 110 horsepower.

K&N Air Charger Cold Air Intake System( $199.99 )

`06- early `07 Chevy/GMC with 6.6L diesel.

Will not fit LMM engine.

B&B Performance Circle Track Valve Covers( $79.99 )

Legendary B&B Performance circle track aluminum valve covers for Chevy small Block.  MADE IN USA!!  Drivers side valve cover has two baffled tubes welded in that accepts 1 3/8" clamp on style breathers.  Passenger side cover is blank.  These are tall design to clear all rockers and stud girdles.

Engraved Chevy Valve Covers( $159.99 )

Engraved valve covers.  Small block Chevy polished cast aluminum valve covers engraved with "She's So Fine Genuine Chevrolet."  Tall design from legendary B&B Performance.  MADE IN USA!

Chevy Centerbolt Tall Valve Covers( $139.99 )

Legendary B&B Performance cast aluminum valve covers for Chevy small block with center bolt valve heads.  Taller than stock to clear most aftermarket rocker arms.  Die cast smooth finish to allow for polishing, painting or powder coating.  MADE IN USA!

Big Block Chevy Die Cast Aluminum Vlave Covers( $89.99 )

Big Block Chevy die cast aluminum valve covers.  Stock height.  Designed to replace weak OEM stamped steel valve covers.  Retains all stock type breather holes and oil caps.  Smooth die cast finish ready for painting, polishing or powder coating.

Racing Alternator-Small Diameter-1 Wire Connection( $189.99 )

Howard Enterprises small diameter one wire connection racing alternator.  MADE IN USA!  This alternator is new, not rebuilt and is not a cheap Chinese import!  75 amp output at idle with 100 amp output at 3000 rpm.  Comes complete with V-belt pully.  Optional serpintine or large diameter reduction pulley's are available.  Drivers side low or mid mount brackets for small and big block Chevy also available.  Howard Enterpirses warrants this alternator for one year regardless of use or application.  Warranty will be replacement or repair at Howard Enterprises descression.

Chrome 1 Wire 100 Amp GM Alternator( $98.99 )

Howard Enterprises chrome one wire connection internal regualted alternator.  MADE IN USA!  This alternator is new, not rebuilt and is not a cheap Chinese import!  75 amp output at idle with 100 amp output at 3000 rpm.  Can be retro-fitted to older GM applications to simplify wiring and eleminate older external voltage regulators.  Comes complete with V-belt pully.  Optional serpintine or large diameter reduction pulley's are available.  This alternator will fit most OEM mounting brackets.  Chrome and aluminum mounting brackets are available. Howard Enterpirses warrants this alternator for one year regardless of use or application.  Warranty will be replacement or repair at Howard Enterprises descression.

50-175HP `86-`93 Mustang 70MM Plate Nitrous System( $421.99 )

The Mustang EFI system is a single-stage adjustable kit (50-175HP) designed as a direct bolt-on installation for late-model vehicles equipped with OEM fuel injection and engine components. It is manufactured for direct bolt-on installations with freeze-free spray bar design and are compatible with OEM engine components. This "freeze-free" kit does not require additional fuel pressure regulators and offers a simple and inexpensive approach to increasing HP on '86 to '93 EFI Mustangs. It's also compatible with many aftermarket intake and injection upgrades. Complete with 70 mm diameter plate, solenoids, lines, filter, hardware, instructions, 14 foot / 4 AN stainless bottle feed line and a 10 lb. capacity bottle.

Universal Power Wing Nitrous Kit For EFI Imports & Domestics( $409.99 )

The PowerWing Nozzle nitrous kits from NitrousWorks, a Barry Grant, Inc. company, make import and small domestic "street cars" into instant "super cars" at the drag strip. The highly acclaimed NitrousWorks™ PowerWing delivers an instant horsepower boost to any engine. With just a click of a button, 25 to 100 added horsepower is available at wide-open throttle. The PowerWing Nozzle nitrous kits are complete, turn-key "Wet Systems".  Complete with Power Wing nozzle, calibrated jets, solenoids, stainless line and fittings, filter, hardware, instructions, 14 foot / 4 AN stainless bottle feed line and a 10 lb. capacity bottle.